Syntix Seal Pro cures oil leaks on engines, gearboxes and hydraulic systems. Improves motor oils properties. The advanced formula of this additive contains active synthetic components that regenerate seals of plastic and rubber.
SYNTIX
SYNTIX SEAL PRO
BASIC BENEFITS
- Repairs and prevents elastomeric seals leaks
- Improves engines lubrication performance
- Reduces oil consumption
- Prevents blue, smoky exhaust fumes
PROPERTIES
- Contains active synthetic components that regenerate seals of plastic and rubber
- Stops the pollution of the environment due to oil dripping from the engine or gearbox
APPLICATION
Recommended for petrol and diesel engines and also gearboxes and hydraulic systems.
Suitable for mineral, semi synthetic and fully synthetic oils (except from brake fluids).
DIRECTIONS FOR USE
The product can be added at any time. After adding, run the engine until warm. Sealing first takes effect after about 600 – 800 km. If the sealing is damaged by external cause, replacement of the seal will be necessary.
Add 1 can (300 ml) to 3-6 litres of oil.
Related products
-
SYNTIX
SYNTIX Petrol Multi Treat
BASIC BENEFITS
- Power restoring
- Fuel savings
- Smoother engine running
- Reduction of smoke and CO2 emissions.
APPLICATION
Suitable for all petrol engines.
DIRECTIONS FOR USE
Use at regular service or when problems appear. Add 1 can to the fuel, for max. 70 liters.
Can be used as concentrate in fuel injection cleaning systems.
SKU: n/a -
SYNTIX
SYNTIX OIL SAVER
BASIC BENEFITS
- Reduces excessive oil consumption and exhaust smoke caused by oil consumption
- Reduces engine noises
- Improves engine reliability & performance by restoring the compression
- Restores oil pressure
- Does not harm catalytic converters or Diesel Particle Filters
PROPERTIES
- Increases the viscosity index of lubricating oils
- Strengthens the oil film at high temperatures
- Prevents metal-to-metal contact under high load
- Protects against corrosion, oxidation, rust and wear
- Compatible with all mineral and synthetic oils.
APPLICATION
Recommended for all petrol and diesel engines of vehicles and stationary equipment with high oil consumption, low oil pressure and low compression and engines producing noise caused by wear. Especially effective in older engines. Will not correct mechanical malfunctions.
DIRECTIONS FOR USE
The product can be added at any time. Before adding, run the engine until warm. Add 1 can (300 ml) to 3 to 5 litres of engine oil. After adding oil saver anti-burn, drive the car for +10 km so the product is properly rotated in the oil system. Use at each oil change.
SKU: n/a -
SYNTIX
SYNTIX DPF REGEN
BASIC BENEFITS
- Trouble-free functioning of the DPF and exhaust treatment systems.
- Increased power.
- Greater fuel economy.
- Smoother engine run.
- Improved engine & turbo compressor reliability.
- Reduced both toxic emissions and smoke.
The regeneration with DPF Regen runs in driving conditions, no special service operations are necessary. The advanced formula reduces the temperature at which the soot particles burn (oxidise). Natural temperature of ignition of the carbon deposits (600°C) is lowered by the chemical to about 400°C.
PROPERTIES
- Restores the proper functioning of the turbo compressor.
- Keeps the variable geometry vanes clean.
- Regenerates the Diesel Particle Filter.
- Keeps the DPF and Catalytic system clean.
APPLICATION
Use for both preventive and problem-solving treatment.
For all types of diesel engines including the latest generation directly injected with CRD, TDI, JTD, HDI,EGR, Diesel Particle Filter and catalyser. This treatment requires no disassembling.
Syntix specialists recommend to clean the DPF and injection system at least once a year.
DIRECTIONS FOR USE
Add the content (300ml) to the tank and add diesel fuel 30L to 50L of fuel.
Do a longer test-drive with the car so the DPF can take some time to clean itself properly.
Drive the vehicle several times at high load and high revs (>3000 rpm) in order to heat the exhaust system. Attention: Make sure to respect speed limits while treating.
SKU: n/a -
SYNTIX
SYNTIX Petrol Detox Pro
Basic benefits
- Optimization of engine performance.
- Smoother engine running.
- Fuel savings.
- Reduction of smoke and CO2 emissions.
- Improved engine reliability.
- Increased power and dynamics.
- Trouble-free functioning of the catalytic system.
Properties
- Cleans and protects injectors, valves and the entire fuel system intensively.
- Protects the fuel system from corrosion.
- Protects the fuel from oxidation and degradation.
- Lubricates injection system and pumps.
- Protects the intake system and EGR-valve from deposits.
- Restores the proper functioning of the turbo compressor.
- Higher octane number.
Application
For daily performance and preventive use. For all types of petrol engines (DI and IDI). The treatment doesn’t require any disassembly. It is highly recommended to clean the fuel and injection system each 30.000 km or at least once a year. E10 fuel compatible.
DIRECTIONS FOR USE
Add the content (1L) to the tank containing 30L to 45L of fuel. Drive the vehicle at high load and high revs (>4000 rpm) in order to heat the engine and exhaust system.
SKU: n/a
