Radiator Refix is a hi-tech product designed to provide Triple-Action servicing of the engine cooling system:
- Repairing small leaks.
- Lubricating the water pump.
- Keeping the system clean and protected.
SYNTIX
SYNTIX RADIATOR REFIX
BASIC BENEFITS
- Effectively repairs small leaks in the cooling system, eliminates the risks of coolant insufficiency in the system
- Easy to use, without disassembly of any parts
- Improves reliability of the cooling system
- Avoid clogging of radiator conduits and temperature sensors
PROPERTIES
- Compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology)
- Resists to high temperatures, vibrations and pressure
- Safe for rubber hoses, gaskets or other system components
- Prevents build-up of calcium deposits
- Protects cooling systems against corrosion and oxidation
- Improves the functioning of the water pump by lubricating it
APPLICATION
Recommended for water cooled systems of all petrol and diesel engines.
Preventive and problem solving application.
DIRECTIONS FOR USE
- Warm up the engine with heater control in HOT position
- Shake bottle well and add content to the cooling system via the expansion tank or directly into the radiator
- Top up the system with coolant if required
- Run engine for 5 minutes to circulate and seal leaks
- One can of 400 ml is sufficient for the cooling system of an average car. For different engines, add 400 ml per 10-12L of coolant
- It’s recommended to clean the cooling system with Radiator Pro Flush Radiator cleaner and refill with new coolant before treatment with Radiator Refix.
ATTENTION: Do not open the cooling system while the engine is hot.
Related products
-
SYNTIX
SYNTIX DPF REGEN
BASIC BENEFITS
- Trouble-free functioning of the DPF and exhaust treatment systems.
- Increased power.
- Greater fuel economy.
- Smoother engine run.
- Improved engine & turbo compressor reliability.
- Reduced both toxic emissions and smoke.
The regeneration with DPF Regen runs in driving conditions, no special service operations are necessary. The advanced formula reduces the temperature at which the soot particles burn (oxidise). Natural temperature of ignition of the carbon deposits (600°C) is lowered by the chemical to about 400°C.
PROPERTIES
- Restores the proper functioning of the turbo compressor.
- Keeps the variable geometry vanes clean.
- Regenerates the Diesel Particle Filter.
- Keeps the DPF and Catalytic system clean.
APPLICATION
Use for both preventive and problem-solving treatment.
For all types of diesel engines including the latest generation directly injected with CRD, TDI, JTD, HDI,EGR, Diesel Particle Filter and catalyser. This treatment requires no disassembling.
Syntix specialists recommend to clean the DPF and injection system at least once a year.
DIRECTIONS FOR USE
Add the content (300ml) to the tank and add diesel fuel 30L to 50L of fuel.
Do a longer test-drive with the car so the DPF can take some time to clean itself properly.
Drive the vehicle several times at high load and high revs (>3000 rpm) in order to heat the exhaust system. Attention: Make sure to respect speed limits while treating.
SKU: n/a -
SYNTIX
SYNTIX SEAL PRO
BASIC BENEFITS
- Repairs and prevents elastomeric seals leaks
- Improves engines lubrication performance
- Reduces oil consumption
- Prevents blue, smoky exhaust fumes
PROPERTIES
- Contains active synthetic components that regenerate seals of plastic and rubber
- Stops the pollution of the environment due to oil dripping from the engine or gearbox
APPLICATION
Recommended for petrol and diesel engines and also gearboxes and hydraulic systems.
Suitable for mineral, semi synthetic and fully synthetic oils (except from brake fluids).
DIRECTIONS FOR USE
The product can be added at any time. After adding, run the engine until warm. Sealing first takes effect after about 600 – 800 km. If the sealing is damaged by external cause, replacement of the seal will be necessary.
Add 1 can (300 ml) to 3-6 litres of oil.
SKU: n/a -
SYNTIX
SYNTIX CERA MAX
BASIC BENEFITS
- Increased power
- Increases in fuel economy
- Less engine noise
- Decreases in oil consumption
- Lowering of CO2
PROPERTIES
- Reduces friction and wear.
- Prevents metal-to-metal contact under high load.
- Protects against corrosion, oxidation, rust and wear.
- Forms an extremely resistant protective film on internal engine parts.
- ZERO SAPS technology: preserves the Diesel Particle Filter (DPF).
- Cera Max is compatible with all types of engine oils.
- Due to their nano-size, these ceramic particles are absolutely safe for oil filters.
APPLICATION
Cera Max is recommended for all petrol and diesel engines including all the latest engine technologies, such as: direct injection, common rail, turbo charged and catalytic converters, also compatible with older engine designs.
Suitable for cars, trucks motorcycles and boats, as well as industrial engines.
Recommendation
For maximum effect and advisability first remove (before applying) the old deposits & acids from the system by cleaning it with Engine Pro Flush in the old oil.
DIRECTIONS FOR USE
To be added at each oil change, 1 can (300 ml) of the Cera Max ceramic additive is suitable for use with 2.5 to 5 liters of oil.
SKU: n/a -
SYNTIX
SYNTIX DIESEL Detox Pro
BASIC BENEFITS
- Powerful cleaning of the fuel injection system
- Active and effective clean-up and keep clean of Diesel Particle Filter (DPF), catalyzer and the variable vanes of the turbo charger
- Clean, lubricate and protect the entire fuel system
PROPERTIES
- Increase cetane number
- Retores engine performance and fuel economy
- Enables filter regeneration. Detox Pro lowers the ignition temperature of soot collected in the filter
APPLICATION
Suited for all diesel (including common rail) engines with or without turbocharger.
DIRECTIONS FOR USE
One bottle treats 40 to 60 liters of diesel. Pour into the fuel tank before refueling for the best mix. Do not overdose.
SKU: n/a
