DIESEL ADDITIVES

Professional cleaning agent for diesel. It can be used both prophylactically and therapeutically. Reduces smoke. It clears by spraying, without disassembly.

This concentrated composition is designed for the increased problems in old and new diesel engines (HDI – CDI – TDI – TDCI – DCI etc). One treatment results in:

• Clean and protect the full spray system.
• Increase in cetane.
• Better acceleration.
• Prevents clogging of the injectors and the pump by removing water from the fuel.
• Reduces fuel consumption.
• Reduction of engine and exhaust emissions.

It destroys bacteria, algae and moisture.

It stabilizes the fuel for 24 months.

Prevents drying-out of the flanges.

Reduces exhaust emissions.

It prevents the filter plug.

BARDAHL BDC is an additional diesel that will depreciate the investment itself, from the fuel savings you can achieve! The Bardahl BDC will reduce fuel consumption by up to 3%.

It is clear that the energy produced by self-ignition, especially in diesel engines, does not have the efficiency of controlled combustion. Control of this burning process is significantly improved by the use of Bardahl organic additive.

Bardahl BDC contains a booster that increases the percentage of cetane. Because of this fuel burning becomes faster and more complete. This results in lower fuel consumption and greater efficiency.

The Bardahl BDC, gives a significant advantage when it comes to saving fuel. In addition, this fuel additive is suitable to add it to storage tanks to prevent bacteria from developing and reducing moisture.

It lowers the combustion temperature to destroy the soot: the oil particles are normally burned at temperatures above 600 ° C. But once it reaches the filter, the temperatures are below 300-350 ° C, which leads to the accumulation of spent sediments on the filter. Because of its active ingredient, this product reduces the temperature at which the particles will burn out, thus removing the contaminants that contaminate the filter.

• Stops filter blocking due to soot accumulation.
• Prevents damage to specific components that allow the burning of pests
• Prevents increased fuel consumption, loss of horsepower and costly replacement of parts caused by filter clogging. and the accumulation of exhaust gases in the engine.
• It burns and destroys the soot accumulated inside the filter.
• Extends the service life and good operation of the particulate filter.

It addresses the problems of cold start and corrosion resulting from paraffin, brown coal or water in the fuel. Cleans the fuel system and improves combustion.