Engine oil additive for engines with wear symptoms. Specially designed to stabilize the viscosity of motor oils at high temperature.
SYNTIX
SYNTIX OIL SAVER
BASIC BENEFITS
- Reduces excessive oil consumption and exhaust smoke caused by oil consumption
- Reduces engine noises
- Improves engine reliability & performance by restoring the compression
- Restores oil pressure
- Does not harm catalytic converters or Diesel Particle Filters
PROPERTIES
- Increases the viscosity index of lubricating oils
- Strengthens the oil film at high temperatures
- Prevents metal-to-metal contact under high load
- Protects against corrosion, oxidation, rust and wear
- Compatible with all mineral and synthetic oils.
APPLICATION
Recommended for all petrol and diesel engines of vehicles and stationary equipment with high oil consumption, low oil pressure and low compression and engines producing noise caused by wear. Especially effective in older engines. Will not correct mechanical malfunctions.
DIRECTIONS FOR USE
The product can be added at any time. Before adding, run the engine until warm. Add 1 can (300 ml) to 3 to 5 litres of engine oil. After adding oil saver anti-burn, drive the car for +10 km so the product is properly rotated in the oil system. Use at each oil change.
Related products
-
SYNTIX
SYNTIX DIESEL Detox Pro
BASIC BENEFITS
- Powerful cleaning of the fuel injection system
- Active and effective clean-up and keep clean of Diesel Particle Filter (DPF), catalyzer and the variable vanes of the turbo charger
- Clean, lubricate and protect the entire fuel system
PROPERTIES
- Increase cetane number
- Retores engine performance and fuel economy
- Enables filter regeneration. Detox Pro lowers the ignition temperature of soot collected in the filter
APPLICATION
Suited for all diesel (including common rail) engines with or without turbocharger.
DIRECTIONS FOR USE
One bottle treats 40 to 60 liters of diesel. Pour into the fuel tank before refueling for the best mix. Do not overdose.
SKU: n/a -
SYNTIX
SYNTIX DPF REGEN
BASIC BENEFITS
- Trouble-free functioning of the DPF and exhaust treatment systems.
- Increased power.
- Greater fuel economy.
- Smoother engine run.
- Improved engine & turbo compressor reliability.
- Reduced both toxic emissions and smoke.
The regeneration with DPF Regen runs in driving conditions, no special service operations are necessary. The advanced formula reduces the temperature at which the soot particles burn (oxidise). Natural temperature of ignition of the carbon deposits (600°C) is lowered by the chemical to about 400°C.
PROPERTIES
- Restores the proper functioning of the turbo compressor.
- Keeps the variable geometry vanes clean.
- Regenerates the Diesel Particle Filter.
- Keeps the DPF and Catalytic system clean.
APPLICATION
Use for both preventive and problem-solving treatment.
For all types of diesel engines including the latest generation directly injected with CRD, TDI, JTD, HDI,EGR, Diesel Particle Filter and catalyser. This treatment requires no disassembling.
Syntix specialists recommend to clean the DPF and injection system at least once a year.
DIRECTIONS FOR USE
Add the content (300ml) to the tank and add diesel fuel 30L to 50L of fuel.
Do a longer test-drive with the car so the DPF can take some time to clean itself properly.
Drive the vehicle several times at high load and high revs (>3000 rpm) in order to heat the exhaust system. Attention: Make sure to respect speed limits while treating.
SKU: n/a -
SYNTIX
SYNTIX Petrol Detox Pro
Basic benefits
- Optimization of engine performance.
- Smoother engine running.
- Fuel savings.
- Reduction of smoke and CO2 emissions.
- Improved engine reliability.
- Increased power and dynamics.
- Trouble-free functioning of the catalytic system.
Properties
- Cleans and protects injectors, valves and the entire fuel system intensively.
- Protects the fuel system from corrosion.
- Protects the fuel from oxidation and degradation.
- Lubricates injection system and pumps.
- Protects the intake system and EGR-valve from deposits.
- Restores the proper functioning of the turbo compressor.
- Higher octane number.
Application
For daily performance and preventive use. For all types of petrol engines (DI and IDI). The treatment doesn’t require any disassembly. It is highly recommended to clean the fuel and injection system each 30.000 km or at least once a year. E10 fuel compatible.
DIRECTIONS FOR USE
Add the content (1L) to the tank containing 30L to 45L of fuel. Drive the vehicle at high load and high revs (>4000 rpm) in order to heat the engine and exhaust system.
SKU: n/a -
SYNTIX
SYNTIX Octane Boost
BASIC BENEFITS
- Enhances the octane level up to 5 points
- Improves fuel combustion & general performance
- Avoid mechanical damages caused by pinging, increasing the engine’s life
APPLICATION
Suitable for all Petrol engines turbocharged and non-turbocharged including the latest generation directly injected with exhaust treatment systems, as well as older engines. Suited for all gasoline (leaded or unleaded) engines with injectors or carburetor. Will not harm catalytic converters.
DIRECTIONS FOR USE
One bottle treats 40 to 60 liters of fuel. Pour into the fuel tank before refueling for the best mix.
SKU: n/a
