AMSOIL 10W40 SYNTHETIC MARINE ENGINE OIL
EXCELLENT ANTI-RUST PERFORMANCE
• Fortified with potent inhibitors that guard against damaging rust and corrosion.
• Protects engines during use and during inactivity or long-term storage.
• Certified by the National Marine Manufacturers Association (NMMA) for use in four-stroke outboard motors.
• Demonstrates outstanding performance and meets the requirements of the NMMA FC-W Catalyst Compatible specification, which is backward-compatible with the FC-W specification.
AMSOIL 15W40 SYNTHETIC HEAVY DUTY DIESEL & MARINE MOTOR OIL
AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is engineered for use in a wide variety of light- and heavy-duty applications, including over-the-road trucks, off-road construction, marine engines, farm equipment, mining, industrial (pumps & generators) and personal automotive or commercial transportation. It is excellent for use with low- or high-sulfur diesel fuels in standard, turbocharged or supercharged engines, including diesels equipped with EGR systems.
AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is recommended for diesel engines, gasoline engines and other applications that require any of the following specifications:
ACEA A3/B3, E2, E3, E5, E7
Mack EO-M, EO-N
Caterpillar ECF-1A, ECF-2
Cummins CES 20076,20077, 20078
Volvo VDS-2, VDS-3
MB 228.1,228.3, 229.1
MAN 271, 3275
MTU Type II
AMSOIL Synthetic Heavy Duty Diesel & Marine Oil is compatible with conventional and synthetic motor oils. Mixing AMSOIL motor oils with other oil, however, will shorten the oil’s life expectancy and reduce the performance benefits.
AMSOIL does not support extended drain intervals where oils have been mixed.
Aftermarket oil additives are not recommended for use with AMSOIL motor oils.
AMSOIL Synthetic Heavy Duty Diesel and Marine Motor Oil is recommended for extended drain intervals in unmodified, mechanically-sound vehicles or equipment as follows:
Diesel Engine Service
Three times (3X) OEM* recommendation, not to exceed 50,000 miles/600 hours or one year, whichever comes first. Drain intervals may be extended further with oil analysis.
Gasoline Engine Service
Two times (2X) OEM* recommendation, not to exceed 15,000 miles or one year, whichever comes first.
*Operating conditions and drain intervals for severe and normal service are defined by the OEM. Refer to your owner’s manual.
Note: Extended drain intervals are not recommended when using biofuels containing >10% ethanol or 10% biodiesel (B10). Follow OEM drain intervals or extend drain intervals with oil analysis.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute. Return used oil to collection centers.
AMSOIL 25W40 SYNTHETIC MARINE ENGINE OIL
Use in gasoline-fueled four-stroke inboards, outboards, inboard/outboards and personal watercraft that require any of the specifications listed below, including those made by Mercury* and Mercruiser*.
NMMA FC-W Catalyst Compatible
Four-stroke outboard motors and personal watercraft: Due to potential fuel dilution or water contamination, change oil at the engine or watercraft manufacturer-recommended interval. Inboard and I/O applications: Change oil at two times the engine manufacturer-recommended interval, or once a year, whichever comes first.
AMSOIL 25W-40 Synthetic Blend Marine Engine Oil is Warranty Secure®, keeping your factory warranty intact. It is a high-performance replacement for vehicle manufacturer-branded products and is also backed by the AMSOIL Limited Warranty (G1363). For details, visit www.amsoil.com/warranty/.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Safety Data Sheet (SDS). And SDS is available via the Internet at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Recycle used oil and bottle.
AMSOIL HP MARINE SYNTHETIC 2-STROKE OIL
Use in two-stroke marine applications that specify TC-W3, including those made by: Johnson/Evinrude*, FICHT*, E-TEC*, Mercury* EFI & Optimax*, Yamaha*, Nissan*, Tohatsu* TLDI*, Suzuki*, Mariner*, Force*. Use as injection oil or 50:1 premix (2.6 oz. per U.S. gallon of gas).
Compatible with mineral and synthetic TC-W3-type two-stroke oils; however, mixing two-stroke oils should be minimized.
HP Marine Synthetic 2-Stroke Oil is Warranty Secure, keeping your factory warranty intact. HP Marine is a high-performance replacement for vehicle manufacturer-branded products and is also backed by the AMSOIL Limited Warranty (G1363). For details, visit www.amsoil.com/warranty/.
AMSOIL SYNTHETIC 2-STROKE INJECTOR OIL
HELPS KEEPS ENGINES CLEAN
Synthetic base oils burn cleanly to help prevent power-robbing deposits.
Fortified with high-temperature detergent and dispersant additives that naturally resist harmful deposits.
Helps prevent ring sticking, ring jacking and exhaust power valve sticking for maximum compression, power and performance.
AMSOIL SYNTHETIC MARINE GEAR LUBE 75W-90
RESISTS RUST & FOAM
Designed to prevent rust and is compatible with aluminum, copper and brass alloys.
Resists foam despite water contamination to ensure a strong fluid film and excellent wear protection.
Promotes long seal life to help prevent water intrusion.
EASY-PACK EASES MAINTENANCE
Award-winning AMSOIL easy-pack reduces mess and hassle when changing lower-unit gear oil.
Eliminates the need to buy and store a messy gear-lube pump.
AMSOIL ΟUTBOARD 100:1 PRE-MIX SYNTHETIC 2-STROKE OIL
For pre-mix use in two-stroke outboard motors, personal watercraft and jet boats that specify TC-W3. For maximum performance, mix with gasoline at 100:1 regardless of the mix ratio specified for the equipment. Richer mix ratios may be used where desired.
RATIO OIL FUEL
50:1 2.6 oz. 1 U.S. GALLON
80:1 8.0 oz. 5 U.S. GALLONS
100:1 8.0 oz. 6 U.S. GALLONS
Outboard Synthetic 2-Stroke Oil is Warranty Secure, keeping your factory warranty intact. Outboard Synthetic 2-Stroke Oil is a high-performance replacement for vehicle manufacturer-branded products and is also backed by the AMSOIL Limited Warranty (G1363). For details, visit www.amsoil.com/warranty/.