Diesel Multi Treat is a highly advanced treatment to clean the complete diesel fuel system and protects the diesel injectors. Foul injectors have a reduced flow and incorrect spraying patterns, reducing the engine performance and raising fuel consumption. This unrivaled additive treatment removes these harmful deposits on the injectors effectively. Besides removing these deposits, Diesel Multi Treat also blocks the formation of new deposits, keeping the engine clean and in an optimal condition.
SYNTIX Diesel Multi Treat
BASIC BENEFITS
- Increased power
- Fuel savings
- Smoother engine running
- Improved engine reliability
- Reduction of smoke and CO2 emissions.
APPLICATION
Suitable for all diesel engines also equipped with Diesel Particle Filters (DPF) and catalyst converters. Biodiesel compatible.
DIRECTIONS FOR USE
Add to fuel before filling.
Related products
-
SYNTIX
SYNTIX ENGINE FLUSH
BASIC BENEFITS
- Restores the engine conditions
- Reduce fuel consumption and exhaust emmissions
- Removes contaminants
APPLICATION
For all gasoline, diesel and LPG engines with or without turbochargers. Compatible with all mineral, semi-synthetic or full synthetic motor oils.
DIRECTIONS FOR USE
Prior to changing the motor oil, pour the contents of one bottle in the crank case of the warm engine. Let the engine run for 5-10 minutes to circulate the flush, alternatively at low and high rpm. Drain the oil from the crank case. Replace oil filter. Refill crank case with SYNTIX Lubricants motor oil for an optimal result.
SKU: n/a -
SYNTIX
SYNTIX OIL SAVER
BASIC BENEFITS
- Reduces excessive oil consumption and exhaust smoke caused by oil consumption
- Reduces engine noises
- Improves engine reliability & performance by restoring the compression
- Restores oil pressure
- Does not harm catalytic converters or Diesel Particle Filters
PROPERTIES
- Increases the viscosity index of lubricating oils
- Strengthens the oil film at high temperatures
- Prevents metal-to-metal contact under high load
- Protects against corrosion, oxidation, rust and wear
- Compatible with all mineral and synthetic oils.
APPLICATION
Recommended for all petrol and diesel engines of vehicles and stationary equipment with high oil consumption, low oil pressure and low compression and engines producing noise caused by wear. Especially effective in older engines. Will not correct mechanical malfunctions.
DIRECTIONS FOR USE
The product can be added at any time. Before adding, run the engine until warm. Add 1 can (300 ml) to 3 to 5 litres of engine oil. After adding oil saver anti-burn, drive the car for +10 km so the product is properly rotated in the oil system. Use at each oil change.
SKU: n/a -
SYNTIX
SYNTIX RADIATOR REFIX
BASIC BENEFITS
- Effectively repairs small leaks in the cooling system, eliminates the risks of coolant insufficiency in the system
- Easy to use, without disassembly of any parts
- Improves reliability of the cooling system
- Avoid clogging of radiator conduits and temperature sensors
PROPERTIES
- Compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology)
- Resists to high temperatures, vibrations and pressure
- Safe for rubber hoses, gaskets or other system components
- Prevents build-up of calcium deposits
- Protects cooling systems against corrosion and oxidation
- Improves the functioning of the water pump by lubricating it
APPLICATION
Recommended for water cooled systems of all petrol and diesel engines.
Preventive and problem solving application.
DIRECTIONS FOR USE
- Warm up the engine with heater control in HOT position
- Shake bottle well and add content to the cooling system via the expansion tank or directly into the radiator
- Top up the system with coolant if required
- Run engine for 5 minutes to circulate and seal leaks
- One can of 400 ml is sufficient for the cooling system of an average car. For different engines, add 400 ml per 10-12L of coolant
- It’s recommended to clean the cooling system with Radiator Pro Flush Radiator cleaner and refill with new coolant before treatment with Radiator Refix.
ATTENTION: Do not open the cooling system while the engine is hot.
SKU: n/a -
SYNTIX
SYNTIX Octane Boost
BASIC BENEFITS
- Enhances the octane level up to 5 points
- Improves fuel combustion & general performance
- Avoid mechanical damages caused by pinging, increasing the engine’s life
APPLICATION
Suitable for all Petrol engines turbocharged and non-turbocharged including the latest generation directly injected with exhaust treatment systems, as well as older engines. Suited for all gasoline (leaded or unleaded) engines with injectors or carburetor. Will not harm catalytic converters.
DIRECTIONS FOR USE
One bottle treats 40 to 60 liters of fuel. Pour into the fuel tank before refueling for the best mix.
SKU: n/a