REPSOL
Showing 97–120 of 219 results
-
REPSOL
REPSOL HAMMER
Grasa Hammer is a grease formulated with a semi-synthetic base oil and lithium complex soap thickener, giving it good melt resistance at high temperatures; it also includes solid additives (copper, molybdenum disulphide) and a special EP additivation giving it outstanding antiseize properties at very high working temperatures.
PACKAGING
SKU: n/a -
REPSOL
REPSOL HD 30, 40, 50
Mono-grade lubricant oil intended for naturally aspirated gasoline or diesel engines. Because it is made up of low-volatility bases, it stands out due to its low consumption, as well as its strength as a detergent and dispersant, and its ability to inhibit oxidation and the formation of foam. It is also suitable for use in certain types of air compressors.
PACKAGING
SKU: n/a -
REPSOL
REPSOL HELEN
The lubricant HELEN is produced with a mix of paraffin and synthetic base oils, designed to lubricate cylinders in steam machinery. It is recommended for this use due to its greasiness, its high flash point, its minimal losses from volatility, and low amount of soot residue.
PACKAGING
SKU: n/a -
REPSOL
REPSOL HIDRAULICO SC
Top-quality lubricants for hydraulic circuits. Manufactured from paraffin bases using ashless technology. They contain special ashless additives for hydraulic systems with extremely fine tolerance servo-valves where excellent filterability in the hydraulic fluid is required.
PACKAGING
SKU: n/a -
REPSOL
REPSOL HIDROLEO
Top-quality lubricants for hydraulic circuits. These are manufactured with the highest-quality bases from paraffinic crude oils.
This hydraulic oil contains ashless-type anti-wear additives, meaning its use is recommended for systems operating in very severe conditions with high filterability requirements: servo-valves, robotics, numerical control equipment, etc., and in hydraulic engines running at very high loads (pressure and temperature).
PACKAGING
SKU: n/a -
REPSOL
REPSOL HYDROFLUX EP
The lubricants included in this range are manufactured using selected base oils and contain carefully selected additives to give them properties of general-use hydraulic oils.
These are highly suitable oils for most hydraulic circuits, both in industry and transportation (dumpers, public works machinery, etc.), regardless of pump type and the pressures they work at.
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERCUT 12 AM
If you’re looking for a pure cutting oil, then IBERCUT 12 AM is just the thing you’re looking for: a pure lubricant with paraffin base oils and additives that are suitable for steel honing. One of its requirements its that it needs deposits to be cleaned prior to being introduced. After doing so, you’ll prevent “oil mist”, chip soldering, and seizing up, providing protection and extending lifespan.
SKU: n/a -
REPSOL
REPSOL IBERCUT 20 A
For jobs with high-density steel, and, more specifically, threading, bolting, and broaching of stainless steel, at Repsol, we have the pure cutting oil IBERCUT 20 A. Its paraffin base oils provide it with a high flash point to prevent risks, smoke formation, and chip soldering.
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERCUT 20 C
IBERCUT 20 C is a pure cutting oil formulated with refined paraffin base oils and a number of additives. It is intended for general machine operations involving steel and alloys that require effective cooling while maintaining a good finish, as its transparency and allows the machinery to be seen. Its cooling qualities extend the lifespan of tools, its low flash point prevents fires, and it does not stain aluminum or copper components.
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERCUT 30 A
The pure cutting oil IBERCUT 30 A is formulated using highly refined natural paraffin mineral base oils that make it a great lubricant, with the film resistance needed in medium-to-high difficulty operations, thus avoiding chip soldering and the seizing up of tools. It is particularly recommended for thread work, rigging, etc. of medium-hard stainless steel, but never for soft, yellow metals.
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERCUT EDM
The lubricant IBERCUT EDM is formulated for cooling, lubricating, and separating the micro-chips that appear in spark erosion work. It is a very light fluid with a high refining level, odorless, glossy, and transparent. This product is suitable for steel honing, due to its low volatility, flammability, and toxicity.
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERTEM 15
A paraffin mineral oil with low viscosity, formulated with refined base oils and specially selected additives which provide the properties required to overcome the difficult conditions needed for the normal quenching of steel. This product has been designed for normal, cold quenching work; where the bath temperature is between 40 and 80°C (104 and 176°F). This kind of oil is used with steel alloys and is formulated to last a long time. This kind of oil is used with steel alloys and is formulated to last a long time.
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERTEM 15-R
This is a paraffin mineral oil with low viscosity, formulated with highly refined base oils, which provide the properties required to operate in the difficult conditions needed for the normal quenching of steel when rapid quenching is not needed. This kind of oil is used with steel alloys and is formulated to last a long time.
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERTEM 24
Natural paraffin mineral oil with low viscosity, formulated with highly refined based oils and selected additives that increase the hardening speed and provide the properties required to overcome the difficult conditions needed in cold, high-speed steel hardening (bath temperature is between 40 and 80ºC).
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERTEM 34
A natural paraffin mineral oil with medium viscosity, formulated with highly refined base oils and specially selected additives. These provide the properties required to operate in the difficult conditions needed for hot, rapid steel quenching; where the bath temperature is between 85 and 125°C (185 and 257°F), and in an enclosed atmosphere above 95° C (203°F). This kind of lubricant is used with carbon or low alloy steel.
PACKAGING
SKU: n/a -
REPSOL
REPSOL IBERTEM 99-F
A natural paraffin mineral oil with high viscosity, formulated with highly refined selected base oils and special additives, which provide the properties required to operate in the difficult conditions needed for hot, rapid steel quenching. This product is particularly suitable for use in hot, rapid quenching, where the bath temperature is between 150 and 180°C (302 and 356°F) and even higher if there is an enclosed atmosphere. This kind of lubricant is used with carbon or low alloy steel.
PACKAGING
SKU: n/a -
REPSOL
REPSOL ICE OIL
The lubricant ICE OIL is recommended for industrial equipment thanks to its capability to lubricate provided by its naphthenic oil compounds for freon, ammonia, and carbon dioxide compressors. This lubricant has a low flocculation point, minimal soot formation, resistance to oxidation, and a low freezing point.
PACKAGING
SKU: n/a -
REPSOL
REPSOL ICE OIL S
Low temperatures are no longer a problem for lubricants in refrigeration equipment, air conditioning, or industrial cooling with HFC coolant gases thanks to Repsol’s synthetic lubricant for compressors, ICE OIL S. This synthetic lubricant’s properties include high viscosity, a low freezing point, thermal stability, and anti-corrosion protection, among others.
PACKAGING
SKU: n/a -
REPSOL
REPSOL LAMINOX 1197
The lubricant LAMINOX 1197 is used primarily for cold rolling of ferritic and austenitic stainless steels with low carbon content. This is a very light lubricant due its refining process and is known for its low viscosity, perfect lubrication in rollers, ease of degreasing, and for lowering the risk of stains.
PACKAGING
SKU: n/a -
REPSOL
REPSOL LAMINOX G 3000
At Repsol, we have developed LAMINOX G 3000 for cold rolling that requires an enhanced lubricant with high load capacity, is resistant to oxidation, prevents deposit formation, and filters easily. It is a very light and highly-refined lubricant with additives specialized in stainless steel.
PACKAGING
SKU: n/a -
REPSOL
REPSOL LAMINOX G 50
The lubricant LAMINOX G 50 is a very light fluid used primarily for cold rolling of ferritic and austenitic stainless steels with low carbon content. Unlike the other lubricants in the LAMINOX range, it is formulated to reduce viscosity as much as possible.
PACKAGING
SKU: n/a -
REPSOL
REPSOL LIBRA HIDRAULICO HLP
This range of lubricants is specially designed for use in hydraulic circuits requiring fluids with anti-wear properties. They are manufactured from a mixture of highly-refined mineral base oils and high-quality regenerated base oils that are carefully treated and purified. Specific additives have also been selected to enhance their anti-wear properties.
To further emphasize Repsol’s commitment to sustainable development, this product range complies with the waste management hierarchy and is the link that completes the ecological chain of manufacturing, use, collection, and recovery of used oils.
PACKAGING
SKU: n/a -
REPSOL
REPSOL LITICA AGR 00
Grasa Lítica AGR 00 is a grease formulated with highly refined mineral oil of very low viscosity, and a simple lithium soap thickener with antiwear and anticorrosion additives. This combination gives its excellent pumpability, good flow at a wide range of temperatures, a low friction coefficient, and very good adherence and unctuousness.
PACKAGING
SKU: n/a