Syntix Winter D anti-freeze additive improves flow properties of diesel fuel at extreme low temperatures.
SYNTIX WINTER D
BASIC BENEFITS
- Allows operation at temperatures down below <- 30°C.
- Increases performance and operational reliability.
- Easy to use.
APPLICATION
Suitable for all diesel engines also equipped with Diesel Particle Filters (DPF) and grades of diesel fuel for reliable cold operation in severe winter conditions.
DIRECTIONS FOR USE
Add 25 ml per 25 litres of diesel fuel (1:1000). Add before filling up and before diesel fuel starts to freeze.
Related products
-
SYNTIX
SYNTIX Petrol Multi Treat
BASIC BENEFITS
- Power restoring
- Fuel savings
- Smoother engine running
- Reduction of smoke and CO2 emissions.
APPLICATION
Suitable for all petrol engines.
DIRECTIONS FOR USE
Use at regular service or when problems appear. Add 1 can to the fuel, for max. 70 liters.
Can be used as concentrate in fuel injection cleaning systems.
SKU: n/a -
SYNTIX
SYNTIX DIESEL Detox Pro
BASIC BENEFITS
- Powerful cleaning of the fuel injection system
- Active and effective clean-up and keep clean of Diesel Particle Filter (DPF), catalyzer and the variable vanes of the turbo charger
- Clean, lubricate and protect the entire fuel system
PROPERTIES
- Increase cetane number
- Retores engine performance and fuel economy
- Enables filter regeneration. Detox Pro lowers the ignition temperature of soot collected in the filter
APPLICATION
Suited for all diesel (including common rail) engines with or without turbocharger.
DIRECTIONS FOR USE
One bottle treats 40 to 60 liters of diesel. Pour into the fuel tank before refueling for the best mix. Do not overdose.
SKU: n/a -
SYNTIX
SYNTIX DPF REGEN
BASIC BENEFITS
- Trouble-free functioning of the DPF and exhaust treatment systems.
- Increased power.
- Greater fuel economy.
- Smoother engine run.
- Improved engine & turbo compressor reliability.
- Reduced both toxic emissions and smoke.
The regeneration with DPF Regen runs in driving conditions, no special service operations are necessary. The advanced formula reduces the temperature at which the soot particles burn (oxidise). Natural temperature of ignition of the carbon deposits (600°C) is lowered by the chemical to about 400°C.
PROPERTIES
- Restores the proper functioning of the turbo compressor.
- Keeps the variable geometry vanes clean.
- Regenerates the Diesel Particle Filter.
- Keeps the DPF and Catalytic system clean.
APPLICATION
Use for both preventive and problem-solving treatment.
For all types of diesel engines including the latest generation directly injected with CRD, TDI, JTD, HDI,EGR, Diesel Particle Filter and catalyser. This treatment requires no disassembling.
Syntix specialists recommend to clean the DPF and injection system at least once a year.
DIRECTIONS FOR USE
Add the content (300ml) to the tank and add diesel fuel 30L to 50L of fuel.
Do a longer test-drive with the car so the DPF can take some time to clean itself properly.
Drive the vehicle several times at high load and high revs (>3000 rpm) in order to heat the exhaust system. Attention: Make sure to respect speed limits while treating.
SKU: n/a -
SYNTIX
SYNTIX CERA MAX
BASIC BENEFITS
- Increased power
- Increases in fuel economy
- Less engine noise
- Decreases in oil consumption
- Lowering of CO2
PROPERTIES
- Reduces friction and wear.
- Prevents metal-to-metal contact under high load.
- Protects against corrosion, oxidation, rust and wear.
- Forms an extremely resistant protective film on internal engine parts.
- ZERO SAPS technology: preserves the Diesel Particle Filter (DPF).
- Cera Max is compatible with all types of engine oils.
- Due to their nano-size, these ceramic particles are absolutely safe for oil filters.
APPLICATION
Cera Max is recommended for all petrol and diesel engines including all the latest engine technologies, such as: direct injection, common rail, turbo charged and catalytic converters, also compatible with older engine designs.
Suitable for cars, trucks motorcycles and boats, as well as industrial engines.
Recommendation
For maximum effect and advisability first remove (before applying) the old deposits & acids from the system by cleaning it with Engine Pro Flush in the old oil.
DIRECTIONS FOR USE
To be added at each oil change, 1 can (300 ml) of the Cera Max ceramic additive is suitable for use with 2.5 to 5 liters of oil.
SKU: n/a