-
SYNTIX
SYNTIX CERA MAX
BASIC BENEFITS
- Increased power
- Increases in fuel economy
- Less engine noise
- Decreases in oil consumption
- Lowering of CO2
PROPERTIES
- Reduces friction and wear.
- Prevents metal-to-metal contact under high load.
- Protects against corrosion, oxidation, rust and wear.
- Forms an extremely resistant protective film on internal engine parts.
- ZERO SAPS technology: preserves the Diesel Particle Filter (DPF).
- Cera Max is compatible with all types of engine oils.
- Due to their nano-size, these ceramic particles are absolutely safe for oil filters.
APPLICATION
Cera Max is recommended for all petrol and diesel engines including all the latest engine technologies, such as: direct injection, common rail, turbo charged and catalytic converters, also compatible with older engine designs.
Suitable for cars, trucks motorcycles and boats, as well as industrial engines.
Recommendation
For maximum effect and advisability first remove (before applying) the old deposits & acids from the system by cleaning it with Engine Pro Flush in the old oil.
DIRECTIONS FOR USE
To be added at each oil change, 1 can (300 ml) of the Cera Max ceramic additive is suitable for use with 2.5 to 5 liters of oil.
SKU: n/a -
SYNTIX
SYNTIX SEAL PRO
BASIC BENEFITS
- Repairs and prevents elastomeric seals leaks
- Improves engines lubrication performance
- Reduces oil consumption
- Prevents blue, smoky exhaust fumes
PROPERTIES
- Contains active synthetic components that regenerate seals of plastic and rubber
- Stops the pollution of the environment due to oil dripping from the engine or gearbox
APPLICATION
Recommended for petrol and diesel engines and also gearboxes and hydraulic systems.
Suitable for mineral, semi synthetic and fully synthetic oils (except from brake fluids).
DIRECTIONS FOR USE
The product can be added at any time. After adding, run the engine until warm. Sealing first takes effect after about 600 – 800 km. If the sealing is damaged by external cause, replacement of the seal will be necessary.
Add 1 can (300 ml) to 3-6 litres of oil.
SKU: n/a -
SYNTIX
SYNTIX OIL SAVER
BASIC BENEFITS
- Reduces excessive oil consumption and exhaust smoke caused by oil consumption
- Reduces engine noises
- Improves engine reliability & performance by restoring the compression
- Restores oil pressure
- Does not harm catalytic converters or Diesel Particle Filters
PROPERTIES
- Increases the viscosity index of lubricating oils
- Strengthens the oil film at high temperatures
- Prevents metal-to-metal contact under high load
- Protects against corrosion, oxidation, rust and wear
- Compatible with all mineral and synthetic oils.
APPLICATION
Recommended for all petrol and diesel engines of vehicles and stationary equipment with high oil consumption, low oil pressure and low compression and engines producing noise caused by wear. Especially effective in older engines. Will not correct mechanical malfunctions.
DIRECTIONS FOR USE
The product can be added at any time. Before adding, run the engine until warm. Add 1 can (300 ml) to 3 to 5 litres of engine oil. After adding oil saver anti-burn, drive the car for +10 km so the product is properly rotated in the oil system. Use at each oil change.
SKU: n/a -
SYNTIX
SYNTIX ENGINE FLUSH
BASIC BENEFITS
- Restores the engine conditions
- Reduce fuel consumption and exhaust emmissions
- Removes contaminants
APPLICATION
For all gasoline, diesel and LPG engines with or without turbochargers. Compatible with all mineral, semi-synthetic or full synthetic motor oils.
DIRECTIONS FOR USE
Prior to changing the motor oil, pour the contents of one bottle in the crank case of the warm engine. Let the engine run for 5-10 minutes to circulate the flush, alternatively at low and high rpm. Drain the oil from the crank case. Replace oil filter. Refill crank case with SYNTIX Lubricants motor oil for an optimal result.
SKU: n/a