TRANSMISSION FLUIDS

Extreme Pressure gear lubricant. Very high lubricating properties to reduce friction. Specially designed for trucks axles and transmissions: Mercedes Benz, MAN or ZF (hypoid differential or not, spurgear or helical, wheel reducer, planetary gear, transmission with separated hydrostatic system). SAE 90 grade at high temperature to provide outstanding oil film resistance at high temperature and to reduce transmission noise.

Specially designed for heavy duty manual transmissions running under high load and extended drain services: DAF, IVECO, MAN, VOLVO, EATON and ZF with or without Retarder…

Especially recommended for ZF truck gearboxes requiring a ZF TE-ML 01L or 02L approved lubricant.

Suitable also for gearboxes and gearbox/differential without limited slip system operating under moderate loads and revolution speed or transfer gearboxes, mechanical transmissions without hypoid gear, reduction gears operating under moderate to severe load and revolution speed.

Designed for providing superior lubricity and protection against wear and corrosion for all types of mechanical transmissions, like synchronised or non-synchronised gearboxes, transaxles, transfer cases and hypoid differentials (open type; non limited slip), operating under shocks, heavy loads and low speeds or moderate loads and high speeds.

Stays in SAE 90 grade after KRL 20 hs Shear Test as requested by SAE J306 Standard.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

Technosynthese® lubricant for a better resistance at high temperature and longer life time. All mechanical transmission, synchronised or not synchronised gearboxes, gearbox/differential, transfer gearbox and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. Very high lubricating power decreases friction and wear. SAE 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears.

Technosynthese® lubricant designed for all mechanical transmission, synchronised or not synchronised gearboxes, gearbox/differential, transfergearbox and hypoïd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

Technosynthese® lubricant specially designed for heavy loaded transmissions and long drain (LD) services: Eaton, Man, Renault, Volvo, ZF with or without intarder.
All mechanical transmission, gearbox/differential and transfer gearboxes without limited slip system operating under moderate loads and low revolution speed. SAE 80 viscosity grade at high temperature reduces gearbox drag and allows fuel consumption. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears.

Specially designed for heavy duty manual transmissions running under high load and long drain services: VOLVO, MAN, MERCEDES and EATON, with or without Retarder…

Especially recommended for VOLVO Trucks gearboxes requiring a VOLVO 97307 approved lubricant.